Difference between revisions of "Device configuration"
From VoiceMailTel Wiki
| Line 19: | Line 19: | ||
<th>Scope</th><th>Port (range)</th><th>Protocol</th><th>IP address</th></tr> | <th>Scope</th><th>Port (range)</th><th>Protocol</th><th>IP address</th></tr> | ||
<tr><td>SIP (signaling)</td><td align="left">5060</td><td>UDP</td><td>204.16.203.5<br>69.90.18.52</td></tr> | <tr><td>SIP (signaling)</td><td align="left">5060</td><td>UDP</td><td>204.16.203.5<br>69.90.18.52</td></tr> | ||
| − | <tr><td>RTP (media)</td><td>10000 to 30000</td><td> | + | <tr><td>RTP (media)</td><td>10000 to 30000</td><td>UDP</td><td>204.16.203.8<br>69.90.18.62</td></tr> |
</table><br> | </table><br> | ||
Revision as of 14:26, 14 September 2010
Generic device settings
For the phones that are not ready to use auto provision feature from us please use the following generic settings:
Proxy: sip.voicemailtel.net Domain realm: sip.voicemailtel.net Outbound proxy: leave blank but if you have to have it use: sip.voicemailtel.net User name: your Voicemailtel terminal id Password: your Voicemailtel terminal password Name: your name Register port: 5060 Registration interval: 3600 seconds or 60 minutes Register with proxy: yes Make call without registration: no Receive call without registration: no
Firewall settings
To ensure your devices are working fine please ensure that the following ports are open on your firewall
| Scope | Port (range) | Protocol | IP address |
|---|---|---|---|
| SIP (signaling) | 5060 | UDP | 204.16.203.5 69.90.18.52 |
| RTP (media) | 10000 to 30000 | UDP | 204.16.203.8 69.90.18.62 |
Configuration guides
| Provider | Auto provision | Manual configuration |
|---|---|---|
 |
480i |
|
 |
||
   |
PAP2 |
|
 |
||
 |
||
| Soft phones |
