Difference between revisions of "SPA525G"

From VoiceMailTel Wiki
Jump to: navigation, search
(Created page with 'File:Linksys-SPA-525G.jpg<br> This device support automatic provision with our service (by completing MAC information on the portal). You will have to do only some minimal se…')
 
Line 4: Line 4:
 
== How to configure your phone ==
 
== How to configure your phone ==
 
1. You must first determine what IP address it received. To do this:
 
1. You must first determine what IP address it received. To do this:
  On the phone dial pad, press the "'''menu'''" button and then '''press 9'''.
+
  On the phone dial pad, press the "'''menu'''" button and then "'''press 9'''".
 +
Select "'''Network status 2'''"
  
 
2. Go to any browser equipped computer on your network and enter the address:  
 
2. Go to any browser equipped computer on your network and enter the address:  

Revision as of 15:33, 19 December 2011

Linksys-SPA-525G.jpg
This device support automatic provision with our service (by completing MAC information on the portal). You will have to do only some minimal settings on the phone.

How to configure your phone

1. You must first determine what IP address it received. To do this:

On the phone dial pad, press the "menu" button and then "press 9".
Select "Network status 2"

2. Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to you in STEP bellow).

3. Click on the "Admin Login" button near the top right and then "advanced", then click on the "Provisioning" tab.

4. Change "Profile Rule:" under "Configuration Profile" to

http://provision.voicemailtel.net/spa$MA.cfg
Spa525g-setup.jpg

5. Click "Submit All Settings" and restart.