PAP2T

From VoiceMailTel Wiki
Jump to: navigation, search

How to configure your device

1. Find your device IP address
You must first determine what IP address it received.
To do this follow next steps:

Pick up the phone attached to the Phone 1 jack and
Dial: **** (four asterisks)
Then dial: 110 #
The device will tell you the assigned IP address (e.g. 192.168.0.100)

2. Access the Web User Interface
Go to any browser equipped computer on your network and enter the address:

http://<IP_ADDRESS>/
(where <IP_ADDRESS> is replaced by the address that was given to you by the device.

3. Configure device
Click on the "Voice" tab then select the "Admin Login" button near the top right side of the screen, then click on the "Advanced" tab and select the "Provisioning" tab.
Provision.png

4. Change "Profile Rule:" under "Configuration Profile" to

http://provision.voicemailtel.net/pap2t$MA.cfg
Pap2tconfig.jpg

5. Save settings and restart the device
Click "Submit All Changes" and restart device by unplug/plug the power.