PAP2T

From VoiceMailTel Wiki
Revision as of 21:16, 5 June 2020 by Forro.gabriel (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Linksys-PAP2T.jpg


How to configure your device

1. Find your device IP address
You must first determine what IP address it received.
To do this follow next steps:

Pick up the phone attached to the Phone 1 jack and
Dial: **** (four asterisks)
Then dial: 110 #
The device will tell you the assigned IP address (e.g. 192.168.0.100)

2. Access the Web User Interface
Go to any browser equipped computer on your network and enter the address:

http://<IP_ADDRESS>/
(where <IP_ADDRESS> is replaced by the address that was given to you by the device.

3. Configure device
Click on the "Voice" tab then select the "Admin Login" button near the top right side of the screen, then click on the "Advanced" option and select the "Provisioning" tab.
Provision.png

4. Change "Profile Rule:" under the "Configuration Profile" menu to

http://provision.voicemailtel.net/pap2t$MA.cfg
Pap2tconfig 001.png

5. Save settings and restart the device
Click "Submit All Changes" and restart device by unplug/plug the power.