Difference between revisions of "PAP2T"

From VoiceMailTel Wiki
Jump to: navigation, search
(Created page with '== How to configure your device == '''1. Find your device IP address'''<br> You must first determine what IP address it received.<br> To do this follow next steps: Pick up the…')
 
Line 16: Line 16:
 
'''3. Configure device'''<br>
 
'''3. Configure device'''<br>
 
Click on "'''Voice'''" tab then "'''Admin Login'''" button near the top right side of the screen, then click on the "'''Advanced'''" and select "'''Provisioning'''" tab.<br>
 
Click on "'''Voice'''" tab then "'''Admin Login'''" button near the top right side of the screen, then click on the "'''Advanced'''" and select "'''Provisioning'''" tab.<br>
[[File:Spa2102-config0.JPG]]
+
[[File:Provision.png]]
  
 
4. Change "'''Profile Rule:'''" under "'''Configuration Profile'''" to  
 
4. Change "'''Profile Rule:'''" under "'''Configuration Profile'''" to  
 
  http://provision.voicemailtel.net/spa$MA.cfg<br>
 
  http://provision.voicemailtel.net/spa$MA.cfg<br>
  [[File:Spa2102-config1.JPG]]
+
  [[File:Pap2tconfig.jpg]]
  
 
5. Save settings and restart the device<br>
 
5. Save settings and restart the device<br>
 
Click "'''Submit All Changes'''" and restart device by unplug/plug the power.
 
Click "'''Submit All Changes'''" and restart device by unplug/plug the power.

Revision as of 12:40, 18 September 2013

How to configure your device

1. Find your device IP address
You must first determine what IP address it received.
To do this follow next steps:

Pick up the phone attached to the Phone 1 jack and
Dial: **** (four asterisks)
Then dial: 110 #
Device will play you the assigned IP address (e.g. 192.168.0.100)

2. Access the Web User Interface
Go to any browser equipped computer on your network and enter the address:

http://<IP_ADDRESS>/
(where <IP_ADDRESS> is replaced by the address that was given to you at previous step.

3. Configure device
Click on "Voice" tab then "Admin Login" button near the top right side of the screen, then click on the "Advanced" and select "Provisioning" tab.
Provision.png

4. Change "Profile Rule:" under "Configuration Profile" to

http://provision.voicemailtel.net/spa$MA.cfg
Pap2tconfig.jpg

5. Save settings and restart the device
Click "Submit All Changes" and restart device by unplug/plug the power.