Aastra 6867i

From VoiceMailTel Wiki
Revision as of 13:02, 27 November 2015 by Gabriel.forro (talk | contribs)
Jump to: navigation, search

How to configure your phone through Zero touch deployment

Zero touch deployment
VoiceMailTel supports Zero touch deployment for Aastra 6867i Phones:

To set up Zero touch deployment please provide the MAC Address of your device to your VoiceMailTel account manager. 
Once the phone has been set up on your VoiceMailTel Account, simply perform a Reset to factory defaults from the Reset menu of your phone`s web interface
Your phone will then connect to your account and download it`s settings

How to configure your phone through auto provisioning

1. Find your phone's IP address

1.1 Press the Settings key to enter the Options List.
1.2 Use V (Down arrow) key to scroll down the list of options to Phone Status and press the Show softkey.
480i-findIP1.jpg
1.3 Use V (Down arrow) key to scroll to Network Status and press the Show softkey.
480i-findIP2.jpg
1.4 Press the IP Addr softkey.
480i-findIP3.jpg
1.5 You will now see your phone’s IP Address
480i-findIP4.jpg

2. Access phone's Web User Interface
Open your favorite web browser and enter the phone’s IP address into the address field. At the prompt, enter your username (by default is "Admin") and password (by default is 22222) and click "OK"
Aastra-config-step1.jpg

3. Configure phone
Press the Advanced Settings on the left menu and then select Configuration Settings and setup as follows:

Download Protocol: HTTP
HTTP Server: provision.voicemailtel.net
Mode: Configuration Files

Aastra-config-step2.jpg

4. Save settings and restart
Click "Save settings" and restart the phone.

For a detailed guide on how to perform the auto provisioning on Aastra devices, please watch the video below. {{#ev:youtube|Q_nETifg0LQ}}