Difference between revisions of "300"

From VoiceMailTel Wiki
Jump to: navigation, search
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[File:Snom300.jpg]]
+
[[File:Snom-300.jpg|300px|thumb|]]
 
== How to configure snom 300 phone ==
 
== How to configure snom 300 phone ==
 
Installing the snom 300 is child's play and possible on the phone itself as well as by remote configuration.
 
Installing the snom 300 is child's play and possible on the phone itself as well as by remote configuration.
  
=== Out of the box configuration ===
+
=== Zero touch deployment ===
This versatile phone allows you to make configuration without touching it. Just send us the '''MAC address''' of the phone together with '''model''' and when you plug in the phone to the internet for the first time it should restart 2-3 times and will be ready for use.
+
VoiceMailTel supports Zero touch deployment for Snom 300 Phones:<br>
 
+
To set up Zero touch deployment please provide the '''MAC Address''' of your device (located on the back label panel of your phone) to your VoiceMailTel account manager. <br>
If the phone was used before you should '''Reset it to factory defaults'''.
+
Once the phone has been set up on your VoiceMailTel Account, simply perform a '''Reset to factory defaults''' from the Reset menu of your phone`s web interface.<br>
 +
Your phone will then connect to your account and download it`s settings.<br>
 +
 +
To reset your phone to factory defaults please follow these steps:
 
   
 
   
 
  Press "Settings" button
 
  Press "Settings" button
  Press "right arrow" 3 times to select "Configuration"
+
  Select "Maintenance" using down arrow.
  Press second button under display to choose "Reset"
+
  Select "Reset values"
 
  Enter 0000 (default admin password)
 
  Enter 0000 (default admin password)
 
  Press Ok (button on the right of navigation arrows)
 
  Press Ok (button on the right of navigation arrows)

Latest revision as of 21:18, 5 June 2020

Snom-300.jpg

How to configure snom 300 phone

Installing the snom 300 is child's play and possible on the phone itself as well as by remote configuration.

Zero touch deployment

VoiceMailTel supports Zero touch deployment for Snom 300 Phones:

To set up Zero touch deployment please provide the MAC Address of your device (located on the back label panel of your phone) to your VoiceMailTel account manager. 
Once the phone has been set up on your VoiceMailTel Account, simply perform a Reset to factory defaults from the Reset menu of your phone`s web interface.
Your phone will then connect to your account and download it`s settings.
To reset your phone to factory defaults please follow these steps: Press "Settings" button Select "Maintenance" using down arrow. Select "Reset values" Enter 0000 (default admin password) Press Ok (button on the right of navigation arrows)

Automatic provision

This should be done after you complete the device information on the customer portal by indicating phone model and mac address (without - or spaces or any other special symbol eg. 0000ED4234AC).

1. Find phone's ip address

Press down arrow then up arrow finally press the check button
You should see the ip address of the phone (eg. 192.168.2.103)

Snom300-ipaddr.png


2. Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/advanced_update.htm
(where <IP ADDRESS> is replaced by the address that was given to you in STEP bellow).

3. Change settings as follow:

Update Policy: Update automatically
Settings URL: http://provision.voicemailtel.net/snom/snom300.php?mac={mac}
Snom320-config0.JPG

4. Save settings and reboot.

Click Save
Click Reboot

After 1-2 restarts, depending if is doing firmware update or not, your phone should be ready.